OZ-TRAK

APRS Mobile Tracker for Raspberry Pi
Track anywhere. No radio required.

 

GPS-powered APRS tracking for the Raspberry Pi. Built for amateur radio operators who want real-time mobile position reporting over the internet.

Below is 3 screenshots that show the complete dashboard as viewed on a desktop device. The dashboard is viewable also on a tablet and a mobile phone. All devices need to be on the same network to see the dashboard. It is not recommended to make the dashboard viewable from the wider internet due to security issues based on PASSCODE that are on the internet.

By clicking on each image below will load the image full size to get a better view hot the dashboard will look on a desktop device. Click BACK on your browser to return to this page.

 

WHAT IS OZ-TRAK?

OZ-TRAK is a free, open source APRS mobile tracker designed to run on Raspberry Pi hardware. It connects to a GPS receiver, authenticates with the global APRS-IS network using your amateur radio callsign, and broadcasts your position in real time — no radio transmitter, no TNC, no licence for the equipment itself (just your amateur radio licence for the callsign). You will need a PASSCODE for you station. There is a link below to obtain your PASSCODE.

Your position appears on aprs.fi and every APRS client worldwide within seconds of each beacon.

 

KEY FEATURES

  • View DASHBOARD on any device including mobile phone and tablet
  • SmartBeacon algorithm — beacons frequently when moving fast or turning, slows right down when stationary. Efficient and responsive.
  • Live browser dashboard — real-time map, GPS fix quality, satellite signal, nearby stations, APRS messaging, clock sync status. Works on any RPI (or Similar ARM64) device.
  • APRS messaging — send and receive APRS text messages directly from the dashboard.
  • GPS clock sync — keeps your Pi’s system clock accurate using GPS time.
  • Compatible with any GPS — USB dongles, UART HATs, 4G HATs with integrated GPS (Waveshare SIM7600X), u-blox, SiRF, PL2303 and more.
  • Systemd integration — runs as a service, starts on boot, auto-restarts on failure.
  • Battery backup ready — works seamlessly with USB-C power banks for portable/vehicle use.
  • Vehicle power — must have a power supply that supplies 5vdc 5 amps for RPi 5. This can be via a simple buck converter for 12Vdc or 24Vdc vehicles (depending on vehicle suppy voltage)

 

HARDWARE

Minimum setup:

  • Raspberry Pi (Zero 2W, 3, 4 or 5) — 64-bit Only
  • Any gpsd-compatible GPS receiver
  • Internet connection

Recommended setup:

  • Raspberry Pi 5 with official 27W USB-C PSU — 64-bit Only
  • 12V/24V to USB-C buck converter (PlusRoc waterproof)
  • USB-C power bank with passthrough (20,000mAh+, 27W PD) for battery backup
  • Internet connection

 

WHO IS IT FOR?

  • Licensed amateur radio operators who want mobile APRS tracking without RF equipment
  • SOTA/POTA activators wanting position reporting
  • Rallies, convoys, events — track multiple vehicles in real time
  • Anyone who wants to appear on aprs.fi from a Raspberry Pi

 

TECHNICAL DETAILS

  • Written in Go — fast, efficient, single binary, no runtime dependencies
  • APRS-IS servers: primary, secondary and fallback with automatic reconnection
  • Dashboard served on port 8080, updates via Server-Sent Events
  • Compressed APRS position packets
  • Logs in daily JSON files with 14-day rotation
  • Tested on Ubuntu 24.04 (ARM 64-bit), Debian 13.3 (ARM 64-bit) and should also work on Raspberry Pi OS (ARM 64-bit). Other OS (ARM 64-bit) should work too but not tested.
  • Only the Raspberry Pi Architecture was tested but other SBC’s could work. None have been tested at this time.
  • Testing was completed with no DESKTOP installed

 

AUTHOR

Adrian Craig (Ozzie), M0GLJ
Amateur Radio Operator, UK

 

NOTE: I would like to try this project on a RPi 5 Compute Module. My understanding of the compute module is that it works just like and RPi 5 and OZ-TRAK should work exactly the same. But this is yet to be tested.

 


Not recommended for those who have not used or have no knowledge of linux.

Recommended that you have a better than a basic knowledge of Linux.


 

Please read the README file for more information on how to use and install. The CHANGELOG file will tell you what has been changed recently.

 

LINKS

  • How APRS works: Read more here
  • Dedicated to the preservation and advancement of the Automatic Packet Reporting System* (APRS) digital communications: APRS Foundation Inc

 

 

Head over the the OZ-TRAK website for the latest information

 

OZ-TRAK Website